HomeGarage floors & makeovers › Edwardsville, IL Serving Edwardsville & the Metro East

Garage floor coatings in Edwardsville, IL

Threshold Builders installs full-flake polyaspartic garage floors for Edwardsville, IL homeowners - diamond-ground prep, crack repair, and a coating that shrugs off road salt, hot tires and dropped tools. Most Edwardsville garages are coated in about a day and back in service the next morning.

About 1 dayTypical 2-3 car install
Diamond-ground prepNot acid-etched like DIY kits
Salt & hot-tire proofPolyaspartic topcoat, 15+ year life
Itemized quotesEvery line visible, free, no pressure
Why Edwardsville homeowners call us

The floor that makes the whole garage feel finished.

Edwardsville is home base for Threshold Builders - our crew lives here, our trucks are parked here, and more of our projects go in within a few miles of downtown than anywhere else. Illinois winters are the real test of a garage floor: months of road salt, slush and freeze-thaw dripping off vehicles onto bare concrete. Bare slabs pit and dust; DIY epoxy kits peel at the first hot tire. A properly prepped, professionally coated floor ends the cycle.

We coat garages across all of Edwardsville - century-old homes in Leclaire and Grandview, lake lots around Dunlap Lake, and newer subdivisions off Governors’ Parkway and Route 157. Every job starts with diamond grinding (never acid etching), moisture testing, and crack and spall repair, then a full-broadcast flake system with a polyaspartic topcoat that stays glossy for decades.

The most common Edwardsville job we quote is a 2-3 car garage in gray or charcoal flake - coated in one day, parked on the next.

Garage services in Edwardsville

Everything a Edwardsville garage needs, from one crew.

Full-flake coating systems

Full-broadcast vinyl flake with a polyaspartic topcoat - the glossy, granite-look floor that hides dust and wears for 15+ years.

Diamond grinding & prep

The step DIY kits skip. We grind the slab to open the pores so the coating bonds permanently - no peeling, no hot-tire pickup.

Crack & spall repair

Pitting, spalling and cracks filled and ground flush before coating, so old damage disappears instead of telegraphing through.

Cabinets & storage systems

Steel cabinet walls, slat wall and overhead racks installed after the floor - the full makeover, one crew.

Containment & trench solutions

Floor drains, trench covers, and containment edges where cars drip and mowers park.

Basements & shop floors

The same coating systems on basement slabs, workshops and mudrooms - anywhere bare concrete is the problem.

Straight numbers

What a garage floor costs in Edwardsville

Every project gets a free, line-by-line itemized quote - prep, repair, coating, and any storage, everything visible before anything is signed. As honest ballparks for Edwardsville:

2-car garage, full-flake system$2,500 - $4,500
3-car garage, full-flake system$3,500 - $6,500
Crack & spall repairIncluded in prep, quoted up front
Cabinets & storage systems$2,000 - $8,000
Basements & shop floorsQuoted by square footage

Ranges reflect typical Edwardsville garages; slab condition and square footage move the number. Your itemized quote is exact.

Where we work in Edwardsville

Neighborhoods and areas we serve

We coat garage floors throughout Edwardsville and the surrounding area, including:

Leclaire Grandview Dunlap Lake Ginger Creek Ebbets Field Montclaire The SIUE campus area Governors’ Parkway corridor

Garage floor questions from Edwardsville homeowners

Real questions we answer at Edwardsville walkthroughs.

How long does a coated garage floor last?

A professionally prepped polyaspartic flake floor lasts 15-20+ years in Edwardsville conditions - salt, slush, hot tires and all. The difference is the prep: diamond grinding gives the coating a mechanical bond that box-store epoxy kits physically cannot achieve on an acid-etched slab.

Is it really done in one day?

Most 2-3 car garages, yes: grind and repair in the morning, base coat and flake midday, topcoat by afternoon. You can walk on it the next morning and park on it in 24-48 hours depending on temperature.

Will road salt and winter slush damage it?

No - that’s the point. The polyaspartic topcoat is chemically resistant to salt, oil, gas and de-icers. Winter mess wipes off with a hose or a flat mop instead of soaking into bare concrete and pitting it.

My slab is cracked and pitted - can you still coat it?

Almost always. Cracks and spalls are ground out, filled with polymer repair compound, and ground flush before the first coat, so the finished floor reads as one clean surface. Genuinely failed slabs are rare - we’ll tell you honestly if yours is one.

Why not just use a DIY epoxy kit?

Kits fail at the bond. Acid etching doesn’t open the slab the way grinding does, water-based kit epoxy is a fraction of the thickness, and hot tires peel it in the first summer. Doing it twice costs more than doing it once.

Do I need a permit for a garage floor coating in Edwardsville?

No - coatings are finish work, not structural, so no permit is needed. If we’re adding electrical with a cabinet or lighting package, we handle any permit that scope requires.

Free walkthrough · Edwardsville, IL

Ready for the cleanest room in the house to be the garage?

Tell us what you're working with. We'll measure, check the slab honestly, and send an itemized quote within days - most floors install in a single day.

Get a free quote
Serving the Metro East

Garage floors & makeovers nearby

The same crew, the same schedule, across these neighboring towns.